- Home
- Cable Cleats
- Products
- Metallic
- Legion (LDAL-C)
Legion (LDAL-C) Top opening Light duty aluminium hinged cable cleat
We'd like to keep in touch
We have some exciting things in the pipeline - if you'd like to be the first to know please enter your email address below.
The Legion cable cleats are metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard IEC 61914: Cable cleats for electrical installations, to ensure the securing and retention of cables, without sustaining damage to the cables.
The range is fabricated from 5000 series aluminium and is available in 23 sizes to suit cable diameters 19mm to 128mm.
The top opening is designed to fit more cleats installed side by side, whilst three M10 fixing clearance holes within each base,
allow the versatility of installing with either one M10 bolt or two M10 bolts. This enables installation of the Legion to a variety of mounting surfaces.
The hinge of the Legion opens fully, allowing cables to be easily placed within the cable cleat, before closing and securing via the mouth piece bolt.
FEATURES
• Third party certification to IEC 61914
• 5000 series aluminium
• 19 – 128mm in 23 sizes for trefoil formation/application
• Operating temperature -60°C to +60°C
• Combined single (M10) or two bolt (M10) fixing design
| SHORT CIRCUIT TESTING TO IEC 91614 - CLAUSE 9.5 | |||
| TREFOIL FORMATION | |||
| One short circuit 300mm fixed cleat centres | One short circuit 300mm fixed cleat centres | One short circuit 600mm fixed cleat centres | One short circuit 600mm fixed cleat centres |
| 0.1 sec | 1 sec | 0.1 sec | 1 sec |
| 114kA Peak | 71kA Peak | 86kA Peak | 55.2kA Peak |
| 51.8kA r.m.s | 33.8kA r.m.s | 40.1kA r.m.s | 26.2kA r.m.s |
| Type | 6.1.3 Composite LDAL-C - Aluminum |
| Design Specification | IEC 61914 |
| Temperature for permanent application | -60ºC to +60ºC IEC 61914 clause 6.2 |
| Needle Flame Test | Pass - 120 second flame application time IEC 61914 clause 10.0, 10.1, IEC 60695-11-5 |
| Lateral Load Test | Refer to CMP Products, IEC 61914 clause 9.3 |
| Axial Load Test | Refer to CMP Products, IEC 61914 clause 9.4 |
| Impact Resistance | Pass - Very heavy IEC 61914 clause 6.3, 6.3.5, 9.2 |
| Material | 5000 Series Aluminum |
Product Selection Table
| LEGION PART NO. | CABLE ø RANGE TAKE (in) | DIMENSIONS (in) | WEIGHT (oz) | |||||
| W | H | D | P | FIXING HOLE ø | ||||
| D1 | D2 | |||||||
| LDALC019023 | 0.748-0.906 | 2.677 | 3.425 | 2.283 | N/A | N/A | 1 x M10 | 7.76 |
| LDALC023028 | 0.906-1.102 | 3.307 | 3.780 | 1.969 | 0.984 | 2 x M10 | 1 x M10 | 7.34 |
| LDALC027032 | 1.063- 1.260 | 3.307 | 4.094 | 1.969 | 0.984 | 2 x M10 | 1 x M10 | 7.58 |
| LDALC031035 | 1.220-1.378 | 3.425 | 4.331 | 1.969 | 0.984 | 2 x M10 | 1 x M10 | 7.76 |
| LDALC034038 | 1.339-1.496 | 3.576 | 4.528 | 1.969 | 0.984 | 2 x M10 | 1 x M10 | 7.94 |
| LDALC037042 | 1.457-1.654 | 4.567 | 4.843 | 1.969 | 1.969 | 2 x M10 | 1 x M10 | 10.09 |
| LDALC041046 | 1.614-1.811 | 4.567 | 5.118 | 1.969 | 1.969 | 2 x M10 | 1 x M10 | 10.34 |
| LDALC045050 | 1.772-1.969 | 4.685 | 5.433 | 1.969 | 1.969 | 2 x M10 | 1 x M10 | 10.55 |
| LDALC049055 | 1.929-2.165 | 4.882 | 5.787 | 1.969 | 1.969 | 2 x M10 | 1 x M10 | 10.86 |
| LDALC052058 | 2.047-2.283 | 5.000 | 6.024 | 1.969 | 1.969 | 2 x M10 | 1 x M10 | 11.08 |
| LDALC056062 | 2.205-2.441 | 5.787 | 6.299 | 1.969 | 2.953 | 2 x M10 | 1 x M10 | 12.91 |
| LDALC060066 | 2.362-2.598 | 5.906 | 6.614 | 1.969 | 2.953 | 2 x M10 | 1 x M10 | 13.16 |
| LDALC064070 | 2.520-2.756 | 6.063 | 6.890 | 1.969 | 2.953 | 2 x M10 | 1 x M10 | 13.40 |
| LDALC068074 | 2.677-2.913 | 6.220 | 7.205 | 1.969 | 2.953 | 2 x M10 | 1 x M10 | 13.69 |
| LDALC072078 | 2.835-3.071 | 6.378 | 7.480 | 1.969 | 2.953 | 2 x M10 | 1 x M10 | 13.97 |
| LDALC076082 | 2.992-3.228 | 7.362 | 7.795 | 1.969 | 2.953 | 2 x M10 | 1 x M10 | 16.51 |
| LDALC080086 | 3.150-3.386 | 7.480 | 8.071 | 1.969 | 2.953 | 2 x M10 | 1 x M10 | 16.76 |
| LDALC084090 | 3.307-3.543 | 7.638 | 8.386 | 1.969 | 2.953 | 2 x M10 | 1 x M10 | 17.00 |
| LDALC090098 | 3.543-3.858 | 7.953 | 8.976 | 1.969 | 2.953 | 2 x M10 | 1 x M10 | 17.57 |
| LDALC098103 | 3.858-4.055 | 8.346 | 9.331 | 1.969 | 2.953 | 2 x M10 | 1 x M10 | 17.92 |
| LDALC103111 | 4.055-4.370 | 9.252 | 9.921 | 1.969 | 2.953 | 2 x M10 | 1 x M10 | 21.02 |
| LDALC111119 | 4.370-4.685 | 9.606 | 10.512 | 1.969 | 2.953 | 2 x M10 | 1 x M10 | 21.55 |
| LDALC119128 | 4.685-5.039 | 10.315 | 11.181 | 1.969 | 2.953 | 2 x M10 | 1 x M10 | 22.19 |
| LEGION PART NO. | CABLE Ø RANGE TAKE (mm) | DIMENSIONS (mm) | WEIGHT (g) | |||||
| W | H | D | P | FIXING HOLE Ø | ||||
| D1 | D2 | |||||||
| LDALC019023 | 19-23 | 68 | 87 | 58 | N/A | N/A | 1 x M10 | 220 |
| LDALC023028 | 23-28 | 84 | 96 | 50 | 25 | 2 x M10 | 1 x M10 | 208 |
| LDALC027032 | 27-32 | 84 | 104 | 50 | 25 | 2 x M10 | 1 x M10 | 215 |
| LDALC031035 | 31-35 | 87 | 110 | 50 | 25 | 2 x M10 | 1 x M10 | 220 |
| LDALC034038 | 34-38 | 90 | 115 | 50 | 25 | 2 x M10 | 1 x M10 | 225 |
| LDALC037042 | 37-42 | 116 | 123 | 50 | 50 | 2 x M10 | 1 x M10 | 286 |
| LDALC041046 | 41-46 | 116 | 130 | 50 | 50 | 2 x M10 | 1 x M10 | 293 |
| LDALC045050 | 45-50 | 119 | 138 | 50 | 50 | 2 x M10 | 1 x M10 | 299 |
| LDALC049055 | 49-55 | 124 | 147 | 50 | 50 | 2 x M10 | 1 x M10 | 308 |
| LDALC052058 | 52-58 | 127 | 153 | 50 | 50 | 2 x M10 | 1 x M10 | 314 |
| LDALC056062 | 56-62 | 147 | 160 | 50 | 75 | 2 x M10 | 1 x M10 | 366 |
| LDALC060066 | 60-66 | 150 | 168 | 50 | 75 | 2 x M10 | 1 x M10 | 373 |
| LDALC064070 | 64-70 | 154 | 175 | 50 | 75 | 2 x M10 | 1 x M10 | 380 |
| LDALC068074 | 68-74 | 158 | 183 | 50 | 75 | 2 x M10 | 1 x M10 | 388 |
| LDALC072078 | 72-78 | 162 | 190 | 50 | 75 | 2 x M10 | 1 x M10 | 396 |
| LDALC076082 | 76-82 | 187 | 198 | 50 | 75 | 2 x M10 | 1 x M10 | 468 |
| LDALC080086 | 80-86 | 190 | 205 | 50 | 75 | 2 x M10 | 1 x M10 | 475 |
| LDALC084090 | 84-90 | 194 | 213 | 50 | 75 | 2 x M10 | 1 x M10 | 482 |
| LDALC090098 | 90-98 | 202 | 228 | 50 | 75 | 2 x M10 | 1 x M10 | 498 |
| LDALC098103 | 98-103 | 212 | 237 | 50 | 75 | 2 x M10 | 1 x M10 | 508 |
| LDALC103111 | 103-111 | 235 | 252 | 50 | 75 | 2 x M10 | 1 x M10 | 596 |
| LDALC111119 | 111-119 | 244 | 267 | 50 | 75 | 2 x M10 | 1 x M10 | 611 |
| LDALC119128 | 119-128 | 262 | 284 | 50 | 75 | 2 x M10 | 1 x M10 | 629 |
